• 产品特点
  • 技术规格

 单缸、四冲程、水冷、电启动发动机

 采用双顶置凸轮轴挺柱式气门驱动技术,简化了气门驱动机构、降低配气机构的传动惯量

 采用双级过滤润滑技术,优化油道,使用外置油管,外置精滤器组合,滤清效果好,且维护方便

 采用内置平衡轴,配置消隙的副齿传动,保证整机振动小、平衡轴齿轮噪声小

 采用全铝镀镍气缸体技术,提高缸体耐磨、耐腐蚀性,降低缸体重量

 采用调整垫片取代调节螺钉方式来驱动气门,点面接触换成了线面接触,磨损更小,气门间隙变化小,减少气门间隙维护

 采用双张紧机构技术,传动平稳,音质柔和

 配置手拉起动装置,满足极限条件下发动机起动需求

 

 Single cylinder, four stroke, water cooled, electric starting engine.

 The technology of double overhead camshaft tappet valve drive simplifies the valve drive mechanism and reduces the transmission inertia of the valve mechanism.

 The two-stage filtration lubrication technology is adopted to optimize the oil passage, and the combination of external tubing and external fine filter has good filtration effect and easy maintenance.

 With built-in balance shaft, equipped with anti-backlash counter gear transmission, to ensure the vibration of the whole engine, balance shaft gear noise is small.

 The all-aluminum nickel plating cylinder block technology to improve the wear resistance and corrosion resistance of the cylinder block and reduce the weight of the cylinder block.

 The valve is driven by adjusting gasket instead of adjusting screw. The point contact is replaced by line contact. The wear is less, the valve clearance changes less, and the valve clearance maintenance is reduced.

 Double tensioning mechanism technology, smooth transmission, soft sound quality.

 The manual starting device is equipped to meet the engine starting requirements under extreme conditions.

外特性曲线 WIDE OPEN THROTTLE CURVES

悬挂图 INSTALLATION DIMENSIONS

Copyright © 2014 loncinengine.com All Rights Reserved
电话:400 636 9980 地址:重庆市九龙坡区九龙工业园C区聚业路116号 邮箱:Engine_loncin@sina.com 传真:86 23 8669 3433